Silverado Port
|
|
Scosche IU3.5RC 3.5mm Retractable Cable $9.99 Retractable design allows the user to neatly connect 3.5mm audio devicesSlender barrel works with recessed 3.5mm jacksCable length: 2.8'... |
|
|
Boss BV7320 In-Dash 3.2-Inch DVD/MP3/CD Widescreen Receiver with USB (Detachable Front Panel) $229.00 NTSC/PAL compatible monitorPLL synthesized AM/FM tuner with 30 station presetsSwitchable USA/Europe radio frequenciesCompatible with audio output of iPod and other MP3 playersCD mute function/last position memory/intro scan1-Bit D/A converter/8x oversamplingESP (anti-skip mechanism)Subwoofer output (BassMax)Dual (front and rear) RCA outputsRear view camera inputIncludes wireless remote control... |
|
|
Chrome Avalanche Tahoe Trailblazer Silverado Port Hole $21.94 |
|
|
YUKON SILVERADO SUBURBAN TAHOE FENDER VENT PORT HOLES $22.99 |
|
|
Fender Vents Port Holes Chevy Silverado Tahoe Suburban $22.25 |
|
|
Chrome Chevy Tahoe Silverado Side Vent Port Holes C 2 $51.99 |
|
|
CHEVY TAHOE SILVERADO CHROME ABS ENGINE PORT HOLE VENTS $19.99 |
Can I put 1996-2000 Chevrolet Vortech Heads on a 1995 Silverado?
I have a 1995 Silverado Z71 K1500 with 5.7L engine and I want to put port and polished Vortech heads on it along with roller lifters and rockers to bring horsepower up.
Yes, you can put Vortec heads on a non Vortec motor. the problem youwill run into is that the bolt pattern for the intake manifold is different on a Vortec than on a regular 350, so if you use Vortec heads you will also have to purchase an intake manifold that is compatible with them. To me it's not really worth doing. Since to use Vortec heads. you have to replace both the heads, and the intake, I would recommend going to Jegs.com and finding a good Edelbrock Performer head and intake package that will not only work well together, but will also provide a much better power increase, and won't cost that much more than the Vortec heads and compatible intake (unless you were gonna get them of an engine in the salvage). Since you have to remove the exhaust anyway to change your heads, I would also recommend getting a good set of Hedman, or Hooker headers for it as well. I have a 1990 GMC with the same 350 you have, and just adding a set of headers to my completely stock engine dropped my 1/4 mile time by over a third of a second. If you put them on a slightly modded engine you should see some great results.
2007 Chevy Silverado dyno, throttle body port & polish
